- To complete the simulation for the circuit
- To adjust the coding according to the circuit that been simulated
Procedure:
This week we completed our simulation in Proteus. Bluetooth does not have in the list of component in the Proteus so we download file to add Bluetooth in list of component in the Proteus. Here is the link to download the file for Bluetooth : Bluetooth for Proteus
Before this we just connect both of the PIC tx and rx leg with jumper wire, so now we already replaced it with Bluetooth in the Proteus.
To completing the coding, we asked help from my partner's cousin that have more experiences in doing microcontroller to combine codings that we had found before this. Finally the coding was completed. To test either the project success or not, we try to combine the coding in the Proteus. When we ran the circuit, all the connection working but the LCD did not display anything. The LCD did have connection, maybe because not all pin of the component have in the simulation.
 |
| Circuit simulation for receiver |
 |
| Circuit simulation for transmitter |
 |
| Coding for receiver |
 |
| Coding for transmitter |
No comments:
Post a Comment