FYP2 : Week 10

Project and Poster Making

Objective : 

• To ensure the device running according to the objectives of the project
• To make a poster that can represent total work for the project

Activity: There were some problem faced during all component interface. However, by having some help and discussion with my fellow friends. That's shown how important of cooperation with others. After all the project running well, I had put all of them inside a box such I had planned before this. I put them by attached them to the box using hot glue. This hot glue make they stay still in their position and make it looks neat. The full picture of device I will share after this when I write the Results and Analysis chapter.

Figure 1 Process of attaching the components to the box using hot glue

After all the device had been placed into the box, the device had tried been running to ensure it still functioning well. Then, the poster making began as the project development had been done. In the poster should have the main parts of the project which are :

1. Project background
2. Objective of the project 
3. Methodology 
4. Flowchart 
5. Results 
6. Conclusion 
7. References

All the information was taken from the report of the project that had been simplified. This is to ensure the poster is not too crowded with words that can make readers boring and do not want to read it. The first draft of my poster had been rejected by my supervisor as the colour was very contrast which could make the poster had to be read. Then I had changed the poster into pastel colours which make ready more calm when they read it. The poster need to be print in A1 size which I need to ensure that the design will not burst the quality of the poster.

Figure 2 Final poster of the project

Conclusion : I need to ensure the project functioning well during the project exhibition and the poster need to be print by tomorrow. Then, I need to do some practice to prepare myself for the project exhibition day.